Welcome to Zclub - Australia's Largest Nissan 370Z and Nissan 350Z Forum
Register for FREE to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing topics, give reputation to other members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.


Engine light

5 posts in this topic

Posted · Report post

I have a 2013 with AEM Cold Air Intake. For the past few months the engine light keeps coming on and sometime the (lost traction) light.

I have taken it to ultra tune and all they could tell me was it was a temp sensor.

I have had the two most forward (front of the car) S/F air temp sensors replaced and I though the problem was fixed and then the light was back on again.

Has anyone had this problem, If so how did you fix it.

I have been told it needs to be tuned/detuned? Has anyone had their 370Z tuned here in Perth?

Regards John

Share this post


Link to post
Share on other sites


Posted · Report post

You need the CEL code. Requires a OBDII reader to extract the code from the car.  Jaycar sell them.

Lost traction light is just that  ....  be a bit more delicate with your right foot.

Share this post


Link to post
Share on other sites

Posted · Report post

Hi BGTV8,

Thanks for the advice. I have ordered a OBD II and hopefully it will tell me where the problems are.

The thing with the traction light is it can come on when I am doing 40Km in forth and other times when I start the car.

Regards John.

Share this post


Link to post
Share on other sites

Posted · Report post

I remember having this issue in the 350z, funno if its the same thing i think mine may have been a cam sensor but i dont remember. However i do remember the car eventually turning off during drives, scary stuff

Share this post


Link to post
Share on other sites

Posted · Report post

Thanks Brett,

I will see what the OBD II reader comes up with once I get it.

Regards John

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now





  • Topics

  • Posts

    • AC Temperature no range. Only cold or hot
      By timjj · Posted
      HI guys,
      I have a 2004 350Z softtop and have had issues with AC unit since I got it. 
      The AC unit has 2 options - Cold (when set at 18 on the dial) and Hot when set to anything but 18. Makes no difference is AC button is on or off. There is no range. I have read it can be because of the sun sensor on the dash (no idea how that could be of any effect). I replaced the passenger side one but makes no difference - no surprise there. I have pulled the white AC control box out from under the stereo but everything looks fine. No broken cables, all lights and functions of the unit work - just the ability to adjust them temperature is stuffed. Anyone come across this issue before and been able to find a solution? Really annoying having either a hot or cold cabin and nothing in between! Thanks! Tim
    • Convertible roof won't go down?
      By timjj · Posted
      Silly reply to start off but make sure you have your foot on the brake. It wont go back unless your are stationary and foot is on the brake. I have the same model and I have found it does not like the cold as previous reply mentioned - must be the rigidity of the fabric. If its a cold morning, it will get about 75% of the way and get stuck. If its warm - goes back no problem. 
    • 370z Wheel choice – Australian market research - FYI
      By Bry · Posted
      Good choice of wheels, now let’s see some pics. I’ve just ordered a set of Nismo wheels from america .
    • 370z Wheel choice – Australian market research - FYI
      By paracin · Posted
      After 2 months of market and forums research, I bought my new wheels – 19” Kiwamis. The following factors were considered: wheel size and spacers, quality, price and the supplier’s customer service. To determine the right size, I thoroughly studied 17 pages of “370z wheel fitment guide” on The370z forum and settled for 9.5 +25 and 10.5 +12, which should provide a flush fit without spacers or camber adjustment while accommodating larger tyres (if so inclined after suspension upgrade). Quality-wise, after considering some questionable 20” Taiwanese options like XXR ($1200+), Koya ($2400+), Vertini ($2800+ with 35% off), Rohana and Ferrada (both over $3K), I settled for a proper JDM option – Work Emotion Kiwami AHG (matte bronze), deep concave front and ultra deep concave rear. JDM Concept’s price is not only cheaper than the above, but also cheaper than Work USA. Regarding customer service, my first choice of wheels were Gram Lights or Weds but I didn’t get a quote from Aaron in nearly 4 weeks (he did apologise); Koya (Koya wheels), Venero (representing Ferrada wheels) and B.Boss (for Vossen VFS-1) NEVER even acknowledged receipt of my web inquiry; the main players on Princess highway between Tempe and Arncliffe, where I inquired in person, were totally disinterested, one even outright rude. (Is it my grey hair, I wonder, that causes people not to take me seriously in a Zed?) The shining stars of customer service are: Leonardy from JDM Concept, representing Work wheels, who replied to all my emails within an hour, often quicker. He specialises in Work wheels and is extremely helpful and accommodating (eg I picked up my wheels within 3 hours from committing to the purchase). George from Rollenso employed significant efforts to assist me with finding the right Lenso wheels. George is experienced, knowledgeable and helpful. I also ordered the tyres from George cheaper than Tempe, and that’s saying something.
    • Offset for Wheels to clear Brembos
      By Punked · Posted
      I think you are both a little confused. Lower offsets wheels (wheels closer to outside or poke from guard) will generally give you more brake clearance. However, some high offset wheels (wheels more sunken from outside of guard) will clear too. Hugely depends on the wheel/spoke shape and design. The factory wheels are 18x8+30 (or close?) and clear Brembo brakes but many aftermarket wheels in those specs will not clear. I run 19x10+15 and 19x11+15 on my 350Z and they clear by a mile. The same wheel as mine in a 18x8+20 probably wouldn't clear... You really need to try some wheels on your car....you will find many of the Japanese wheels are made to clear larger brakes (not always though)... https://www.1010tires.com/Tools/Wheel-Offset-Calculator# this is the best for fitment- won't help with your clearance issue though. Cheeeeeers