Welcome to Zclub - Australia's Largest Nissan 370Z and Nissan 350Z Forum
Register for FREE to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing topics, give reputation to other members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.


See who gave reputation

There's nothing here yet





  • Topics

  • Posts

    • Carbon Fibre Ducktail
      By j-train · Posted
      Looks awesome, these always remind me of someone wearing a cap.  This is heaps cheaper than a US company was asking.  At 300ish its worth a shot.  Put up some photos of it once you've finished finessesing.  
    • Carbon Fibre Ducktail
      By Bry · Posted
      My attempt at fitting it would involve a hammer ,blue tack and no more nails  
    • Carbon Fibre Ducktail
      By paracin · Posted
      Spoiler is from Ebay, currently on special. It does look fantastic, and it's a real carbon fibre, not a vinyl wrap.. Regarding fine adjustments, there is a concern that small fibres may cause complications similar to those of asbestos so I'm getting a full face mask and disposable overalls. https://www.ebay.com.au/itm/CARBON-FIBER-CS-TYPE-N-STYLE-TRUNK-WING-REAR-SPOILER-FOR-NISSAN-370Z/262399870438  
    • Carbon Fibre Ducktail
      By Bry · Posted
      Looks a pretty damn close fit and so much better than the stock spoiler. Work wheels look great too, very tastefull mods. Got a link to where you ordered your  spoiler from?
    • Carbon Fibre Ducktail
      By paracin · Posted
      It's a no-name brand, but the quality of workmanship is pretty good. I don't see many classic hand-laid-carbon-fibre faults. It didn't come with any instructions, screws, tape or paper templates. I don't recommend fitting it yourself as it is really time consuming for a beginner (me). But I already started so... OK, trial fitting (screws only). Middle part fits well, the RHS needs minor adjustment (2-4mm) and the LHS needs probably at least several mm. The problem is that it needs to be ground exactly where one of the 4 main screws is. I'll try on the weekend.